FIKO is a private industrial company, owner of titanium mill in Kiev, Ukraine, for melting titanium ingots with their further working into rolled titanium materials: bars, tubes, sheets, plates, wire.
|
History of titanium Titanium is a unique metal. As per its specific strength titanium has no equal among industrial metals. Titanium is harder in 12 times than aluminum, in 4 times than iron and copper. Yield strength of titanium is higher in 18 times than of aluminum and in 2,5 times than of iron. At extremely low temperatures titanium is not damaged as other metals but vice versa becomes firmer. Therefore titanium is a basic construction material of space vehicles.
Discovery of titanium took place three times. In 1789-1791 the English chemist U. Gregor analyzed properties of magnetic iron from the district of Menaken in Kornuela (South England). During long chemical experiments he selected "new ground" (the oxide of unknown metal) which he named menaken.
In 1795 the German chemist M. Klaptor researching rutile mineral discovered a new element which he named titanium. Two years later having compared the results of his researches with Gregor’s ones, M. Klaptor came to conclusion, that it is the same metal. Ten years later a wonderful metal was opened in the third time. The French scientist L. Voklen found out titanium in anatase and proved that rutile and anatase are titanium oxides.One of remarkable properties of titanium is his unusual corrosion resistance. Another important quality of titanium is its non-magnetization, that arises significant interest for its use not only in an aviation and cosmonautics but also in the production of chemical equipment, heat-exchangers, marine borings platforms, vessel corps, framework elements and revetment of modern buildings. Besides titanium is used in manufacture of watch-cases, golf-clubs, bicycle frames and even jewelry.
Titanium ingot: titanium ingot ASTM Grade 1 titanium ingot ASTM Grade 2, titanium ingot ASTM Grade 3, titanium ingot ASTM Grade 4, titanium ingot ASTM Grade 5, titanium ingot ASTM Grade 9, titanium ingot ASTM Grade Ti6AL/4V Titanium materials including: Titanium bar ASTM Grade 1, Titanium bar AS TM Grade Ti6AL/4V Titanium sheet ASTM Grade 1, Titanium sheet ASTM Grade 2 Titanium sheet ASTM Grade 3, Titanium sheet ASTM Grade 4 Titanium sheet ASTM Grade 5 Titanium sheet ASTM Grade 9, Titanium sheet ASTM Grade Ti6AL/4V Titanium plate ASTM Grade 1, Titanium plate ASTM Grade 2 Titanium plate ASTM Grade 3, Titanium plate ASTM Grade 4 Titanium plate ASTM Grade 5 Titanium plate ASTM Grade 9, Titanium plate ASTM Grade Ti6AL/4V Titanium pipe ASTM Grade 1, Titanium pipe ASTM Grade 2 Titanium pipe ASTM Grade 3, Titanium pipe ASTM Grade 4 Titanium pipe ASTM Grade 5 Titanium pipe ASTM Grade 9, Titanium pipe ASTM Grade Ti6AL/4V Titanium wire Titanium tube.
Titanium slab: Titanium slab ASTM Grade 1, Titanium slab ASTM Grade 2 Titanium slab ASTM Grade 3, Titanium slab ASTM Grade 4 Titanium slab ASTM Grade 5 Titanium slab ASTM Grade 9, Titanium slab ASTM Grade Ti6AL/4V
|
|
Our group is represented in the world titanium market for about 15 years. FIKO is a member of International Titanium Association and International Tube Association. We supply our products to numerous countries worldwide - Germany, France, Finland, Switzerland, Italy, Japan, China, South Korea, Turkey, India, Pakistan and other markets. Our prime production are titanium ingots single melted by electron-bean method. We offer supply of our titanium goods in large quantities by air, sea container, truck – as well as small quantities via courier post. The range of titanium goods we can offer in both large and small quantities from our two warehouses - in Kiev (Ukraine) includes: Board of Directors of Fiko ltd has made a resolve to open Christian page on its industrial web site. So we are interested in links exchange with Christian web sites, Christian portals and bulletin board, Christian Churches, industrial and trade sites where owners of these companies are members of evangelic churches of different countries. In addition to titanium materials we are ready to realize collaboration concerning supply of other non-ferrous metal: copper tube copper sheets copper plates copper bars copper wire copper ingots aluminium tubes aluminium sheets aluminium tubes aluminium bars aluminium plates aluminium wire aluminium ingots bronze sheets bronze plates bronze bars bronze tubes bronze wire bronze ingots brass bars brass tubes brass sheets brass plates brass wire brass tubes brass ingots zirconium ingots zirconium sheets zirconium plates zirconium bars zirconium tubes zirconium wire zinc ingots zinc sheets zinc plates zinc bars zinc tubes zinc wire tin ingots tin sheets tin plates tin bars tin tubes tin wire tantalum ingots tantalum sheets tantalum plates tantalum bars tantalum tubes tantalum wire
|
Titanium ingot |
Grade1, Grade2, Ti6Al/4V, 5V (dia 370 - 510 mm) |
Titanium slab |
Grade1, Grade 2, Ti6Al/4V, ВТ1-0, ОТ4 |
Titanium bar |
|
hot rolled bar |
dia 10 to 330mm, different grades |
cold rolled bar |
dia 10 to 330mm, different grades |
forged bar |
dia 60 to 330mm, different grades |
turned bar |
|
titanium 5V forged bar |
dia 470 - 510 mm |
Titanium sheet |
0.5 to 10 mm different alloys |
Titanium plate |
11 to 80mm VT1-0, VT6, ОТ4, VТ20, VТ14, PT-3V, SP-3V |
Titanium seamless tubeTitanium welded tube |
we take orders for production |
Titanium wire |
titanium welding wire 1 to 6 mm in coils |
Titanium tank |
we take orders for production according to customer's drawings |
Under your specific order we will consider manufacture of
-
titanium hot rolled bar , titanium forged bar, titanium turned bar
-
titanium sheet 0.5 to 10mm thickness
-
titanium plate 11 to 100 mm thickness
-
Titanium seamless tube, titanium welded tube
-
titanium wire
-
titanium ingot
-
titanium slab
-
titanium equipment - titanium heat exchangers, titanium tanks; titanium details - titanium rings, titanium flanges, titanium disks
-
titanium billets for casting and stamping
r special offer - melting furnaces equipped with cold-cathode type electron-beam guns, 600 kWt capacity for ingots production from titanium, zirconium, nickel, copper and other metals. These furnaces were created and patented at our titanium mill in Kiev. Possible productive capacity of such melting facilities is two six-ton titanium ingots per one melting. The output per year is up to 2600 Mt. Quality management is certified by TUV.
Under your order we can:
1) produce titanium ingots and other hot-rolled titanium materials
2) design and manufacture the unique equipment with your drawings from titanium, stainless steel or other non-ferrous metals
3) design and fabricate electron-beam facility - from laboratory furnace to industrial facility
4) supply spare parts for electron-beam furnace: guns VTR-600, vacuum system, power supply system and other
Chemical composition and mechanical properties of titanium seamless tube according to GOST, TU
and Titanium tubeASTM B337
|
Grade |
Chemical composition, % |
Mechanical properties |
Specification or |
|||||||||||||
|
|
N |
C |
H |
Fe |
O |
Al |
V |
Zr |
Residual, max |
Ti |
sB,MPa |
s0,2MPa |
d,% |
technical |
||
|
|
max |
max |
max |
max |
max |
|
|
|
each |
total |
|
|
min |
max |
min |
requirements |
|
Titanium tube Grade 2 |
0.03 |
0.1 |
0.015 |
0.3 |
0.25 |
- |
- |
- |
0.1 |
0.4 |
base |
345 |
275 |
450 |
20 |
ASTM B 337 Titanium tube
|
|
Titanium tube V 1-0 |
0.04 |
0.07 |
0.01 |
0.25 |
0.2 |
0.7max |
- |
- |
- |
0.3 |
base |
343-568 |
- |
- |
24 |
GOST 22897-86 Titanium tube
|
|
Titanium tube Grade 9 |
0.02 |
0.05 |
0.013 |
0.25 |
0.12 |
2.5-3.5 |
2.0-3.0 |
- |
0.1 |
0.4 |
base |
860A) 620B) |
725A) 485B) |
- |
10A) 15B) |
ASTM B 337 Titanium tube
|
|
Titanium tube PT 3V |
0.04 |
0.1 |
0.006 |
0.25 |
0.12 |
3.5-5.0 |
1.2-2.5 |
0.3 |
- |
0.3 |
base |
735 |
617 |
- |
12 |
TU-3-1280-84 Titanium tube
|
Chemical composition and mechanical properties of titanium baraccording to GOST 26492-85 and titanium bar ASTM B 348
|
Grade |
Chemical composition, % |
Mechanical properties |
Alloy composition |
||||||||||||
|
|
N |
C |
H |
Fe |
O |
Al |
Residual, max |
Ti |
sB,MPa |
s0,2,MPa |
d,% |
y,% |
% |
||
|
|
max |
max |
max |
max |
max |
max |
each |
total |
|
min |
min |
min |
min |
Al |
V |
|
Titanium bar Grade 2 |
0.03 |
0.1 |
0.013 |
0.3 |
0,25 |
- |
0,1 |
0,4 |
base |
345 |
275 |
20 |
30 |
- |
- |
|
Titanium bar Grade VT 1-0 |
0.04 |
0.07 |
0.01 |
0.25 |
0.2 |
0.7 |
- |
0.3 |
base |
345 |
- |
15 |
40 |
- |
- |
|
Titanium bar Grade 5 |
0.05 |
0.1 |
0.013 |
0.4 |
0.2 |
- |
0.1 |
0.4 |
base |
895 |
825 |
10 |
25 |
5.5-6.75 |
3.5-4.5 |
|
Titanium bar VT 6 |
0.05 |
0.1 |
0.015 |
0.6 |
0.2 |
- |
- |
0.3 |
base |
905-1050 |
- |
10 |
30 |
5.3-6.8 |
3.5-5.3 |
|
Titanium barVT 6s |
0.04 |
0.1 |
0.015 |
0.25 |
0.15 |
- |
- |
0.3 |
base |
835-980 |
- |
10 |
30 |
5.3-6.5 |
3.5-4.5 |
Chemical composition and mechanical properties of titanium plate according to
GOST 23755-79 and titanium plate ASTM B 265
|
Grade |
Chemical composition, % |
Mechanical properties |
Alloy composition |
||||||||||||||
|
N |
C |
H |
Fe |
O |
Al |
Residual, max |
Ti |
sB,MPa |
s0,2,MPa |
d,% |
bend test |
% |
|||||
|
max |
max |
max |
max |
max |
max |
each |
total |
min |
max |
min |
|
Al |
V |
Sn |
|||
|
Titanium plate Grade 9 |
0.02 |
0.1 |
0.015 |
0.25 |
0.15 |
- |
0.1 |
0.4 |
base |
620 min |
485 |
- |
15 |
57o |
2.5-3.5 |
2.0-3.0 |
- |
|
Titanium plate PT-3V |
0.04 |
0.1 |
0.006 |
0.25 |
0.15 |
- |
- |
0.3 |
base |
880 max |
- |
- |
10 |
120 o |
3.5-5.0 |
1.2-2.5 |
- |
|
Titanium plate Grade 6 |
0.05 |
0.1 |
0.015 |
0.5 |
0.2 |
- |
0.1 |
0.4 |
base |
830 man |
795 |
- |
10 |
87 o |
4.0-6.0 |
- |
2.0-3.0 |
|
VT 5-1 |
0.05 |
0.1 |
0.015 |
0.3 |
0.15 |
- |
- |
0.3 |
base |
730-930 |
- |
- |
6 |
90 o |
4.3-6.0 |
1 |
2.0-3.0 |
|
Titanium plate Grade 2 |
0,03 |
0,10 |
0,015 |
0,30 |
0,25 |
- |
0,1 |
0,4 |
base |
345 min |
275 |
450 |
20 |
57 o |
- |
- |
- |
|
Titanium plate VT 1-0 |
0,04 |
0,07 |
0,010 |
0,25 |
0,20 |
0,7 |
- |
0,30 |
base |
370-570 |
- |
- |
13 |
40 o |
- |
- |
- |
GOST 23755-79
|
Other elements |
|
||||||||||||||||||
|
Grades |
Ti |
Al |
Mn |
Mo |
V |
Zr |
Cr |
Tin |
Si |
Fe |
C |
Fe |
Si |
Zr |
O |
N |
H |
Res |
Grades |
|
Titanim bar VT1-0 |
base |
|
|
|
|
|
|
|
|
|
0,07 |
0,25 |
0,1 |
|
0,2 |
0,04 |
0,01 |
0,3 |
Titanium sheet VT1-0 |
|
Titanim bars OT4-0 |
base |
0.4-1.4 |
0.5-1.3 |
|
|
|
|
|
|
|
0,1 |
0,3 |
0,12 |
0,3 |
0,15 |
0,05 |
0,012 |
0,3 |
Titanium sheets OT4-0 |
|
Titanim tube OT4-1 |
base |
1.5-2.5 |
0.7-2.0 |
|
|
|
|
|
|
|
0,1 |
0,3 |
0,12 |
0,3 |
0,15 |
0,05 |
0,012 |
0,3 |
Titanium plate OT4-1 |
|
Titanim tubes OT4 |
base |
3.5-5.0 |
0.8-2.0 |
|
|
|
|
|
|
|
0,1 |
0,3 |
0,12 |
0,3 |
0,15 |
0,05 |
0,012 |
0,3 |
Titanium plates OT4 |
|
Titanim bar VT5-1 |
base |
4.3-6.0 |
|
|
|
|
|
2.0-3.0 |
|
|
0,1 |
0,3 |
0,12 |
0,3 |
0,15 |
0,05 |
0,015 |
0,3 |
Titanium sheet VT5-1 |
|
Titanim bars VT5 |
base |
4.3-6.0 |
|
|
|
|
|
|
|
|
0,1 |
0,3 |
0,12 |
0,3 |
0,2 |
0,05 |
0,015 |
0,3 |
Titanium sheets VT5 |
|
Titanim tube VT6 |
base |
5.3-6.8 |
|
|
3.5-5.3 |
|
|
|
|
|
0,1 |
0,3 |
0,1 |
0,3 |
0,2 |
0,05 |
0,015 |
0,3 |
Titanium plate VT6 |
|
Titanim tubes VT6S |
base |
5.3-6.5 |
|
|
3.5-4.5 |
|
|
|
|
|
0,1 |
0,25 |
0,15 |
0,5 |
0,15 |
0,04 |
0,015 |
0,3 |
Titanium plates VT6S |
|
Titanim bar VT3-1 |
base |
5.5-7.0 |
|
2.0-3.0 |
|
|
0.8-2.0 |
|
0.15-0.40 |
0.2-0.7 |
0,1 |
|
|
0,5 |
0,15 |
0,05 |
0,015 |
0,3 |
Titanium sheet VT3-1 |
|
Titanim bars VT8 |
base |
5.8-7.0 |
|
2.8-3.8 |
|
|
|
|
0.20-0.40 |
|
0,1 |
0,3 |
|
0,5 |
0,15 |
0,05 |
0,015 |
0,3 |
Titanium sheets VT8 |
|
Titanim tube VT9 |
base |
5.8-7.0 |
|
2.8-3.8 |
|
1.0-2.0 |
|
|
0.20-0.35 |
|
0,1 |
0,25 |
|
|
0,15 |
0,05 |
0,015 |
0,3 |
Titanium plate VT9 |
|
Titanim tubes VT14 |
base |
3.5-6.3 |
|
2.5-3.8 |
0.9-1.9 |
|
|
|
|
|
0,1 |
0,25 |
0,15 |
0,3 |
0,15 |
0,05 |
0,015 |
0,3 |
Titanium plates VT14 |
|
Titanim bar VT15 |
base |
2.3-3.6 |
|
6.8-8.0 |
|
|
9.5-11.5 |
|
|
|
0,1 |
0,3 |
0,15 |
|
0,12 |
0,05 |
0,012 |
0,3 |
Titanium sheet VT15 |
|
Titanim bars VT16 |
base |
1.8-3.8 |
|
4.5-5.5 |
4.0-5.0 |
|
|
|
|
|
0,1 |
0,25 |
0,15 |
0,3 |
0,15 |
0,05 |
0,015 |
0,3 |
Titanium sheets VT16 |
|
Titanim tube VT18 |
base |
7.2-8.2 |
|
0.2-1.0 |
|
10.-12. |
|
|
0.05-0.18 |
|
0,1 |
0,15 |
|
|
0,14 |
0,05 |
0,015 |
0,3 |
Titanium plate VT18 |
|
Titanim tubes VT18u |
base |
6.2-7.3 |
|
0.4-1.0 |
|
3.5-4.5 |
|
2.0-3.0 |
0.10-0.25 |
|
0,1 |
0,2 |
|
|
0,14 |
0,04 |
0,015 |
0,3 |
Titanium plates VT18u |
|
Titanim bar VT20 |
base |
5.5-7.0 |
|
0.5-2.0 |
0.8-2.5 |
1.5-2.5 |
|
|
|
|
0,1 |
0,25 |
0,15 |
|
0,15 |
0,05 |
0,015 |
0,3 |
Titanium sheet VT20 |
|
Titanim bars VT22 |
base |
4.4-5.7 |
|
4.0-5.5 |
4.0-5.5 |
|
0.5-1.5 |
|
|
0.5-1.5 |
0,1 |
|
0,15 |
0,3 |
0,18 |
0,05 |
0,015 |
0,3 |
Titanium sheets VT22 |
|
Titanim tube VT23 |
base |
4.0-6.3 |
|
1.5-2.5 |
4.0-5.0 |
|
0.8-1.4 |
|
|
0.4-1.0 |
0,1 |
|
0,15 |
0,3 |
0,15 |
0,05 |
0,015 |
0,3 |
Titanium plate VT23 |
|
Titanim tubes VT25 |
base |
6.2-7.2 |
|
1.5-2.5 |
|
0.8-2.5 |
|
|
0.10-0.25 |
|
0,1 |
0,25 |
0,1 |
|
0,15 |
0,04 |
0,015 |
0,3 |
Titanium plates VT25 |
|
Titanim bar PT1M |
base |
0.2-0.7 |
|
|
|
|
|
|
|
|
0,07 |
0,2 |
0,1 |
0,3 |
0,12 |
0,04 |
0,006 |
0,3 |
Titanium sheet PT1M |
|
Titanim bars 2V |
base |
1.5-2.5 |
|
|
1.0-2.0 |
|
|
|
|
|
0,07 |
0,2 |
0,1 |
|
0,12 |
0,04 |
0,003 |
0,3 |
Titanium sheets 2V |
|
Titanim tube PT3V |
base |
3.5-5.0 |
|
|
1.2-2.5 |
|
|
|
|
|
0,1 |
0,25 |
0,12 |
0,3 |
0,12 |
0,04 |
0,006 |
0,3 |
Titanium plate PT3V |
|
Titanim tubes 3M |
base |
3.5-5.0 |
|
|
|
|
|
|
|
|
0,1 |
0,25 |
0,12 |
0,3 |
0,15 |
0,04 |
0,006 |
0,3 |
Titanium plates 3M |
|
Titanim bar PT7M |
base |
1.8-2.5 |
|
|
|
2.0-3.0 |
|
|
|
|
0,1 |
0,25 |
0,12 |
|
0,15 |
0,04 |
0,006 |
0,3 |
Titanium sheet PT7M |
|
Titanim bars 5V |
base |
4.4-6.0 |
|
0.7-1.4 |
1.0-1.9 |
|
|
|
|
|
0.06-0.1 |
0,25 |
0,12 |
0,1 |
0,13 |
0,04 |
0,005 |
0,3 |
Titanium sheets 5V |
www.kapitalstroy.com.ua www.goldenage.kiev.ua